Meyer, Josua Petrus

Todos los autores A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Meyer, Josua Petrus

Professor and Head of Department
jpm2@sun.ac.za
https://www.eng.sun.ac.za/prof-meyer/(abrir en una nueva pestaña)

Department of Mechanical and Mechatronic Engineering, Stellenbosch University, Banghoek Rd, Stellenbosch Central, Stellenbosch, 7600, South Africa

Mechanical & Aeronautical Engineering
Stellenbosch University, Banghoek Rd, Stellenbosch Central, Stellenbosch, 7600, South Africa
https://www.eng.sun.ac.za/(abrir en una nueva pestaña)

Transition, Forced convection, Multiphase flows, Flow patterns, Boiling, Solidification, Heat exchangers

ASME, ASHRAE, AIAA

PhD

Thomas Price, Rand Coal, LT Campbell-Pitt, Literati

Professor and Head: Mechanical & Aeronautical Engineering, University of Pretoria
July 2002 – Present (13 years 6 months)

Prof Josua P Meyer obtained his B.Eng. (cum laude) 1984, M.Eng. (cum laude) 1986, and his Ph.D. (1988) all in Mechanical Engineering from the University of Pretoria. He is registered as a Professional Engineer and he completed his military service at the Faculty of Military Science, University of Stellenbosch where he lectured aerodynamics for pilots in the South African Air Force. After his two years of military service (1988 – 1989), he accepted a position as Associate Professor in the Department of Mechanical Engineering at North-West University in 1990. He was Acting Head and Professor in Mechanical Engineering before accepting a position as professor in the Department of Mechanical and Manufacturing Engineering at the University of Johannesburg in 1994. He was the Chairperson of Mechanical Engineering from 1999 until the end of June 2002 after which he was appointed as Professor and Head of the Department of Mechanical and Aeronautical Engineering of the University of Pretoria from 1 July 2002. He is Chairperson of the School of Engineering since 1 January 2004. He teaches and conducts research in heat transfer, fluid mechanics and thermodynamics.

Professor and Chair: Mechanical Engineering
University of Johannesburg (Rand Afrikaans University)
June 1994 – June 2002 (8 years 1 month)

selected:
Article: Heat transfer and entropy generation in a parabolic trough receiver with wall-detached twisted tape inserts
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer
Conference Paper: Optimisation of Conjugate Elliptical Cooling Channels With Internal Heat Generation
Olabode Thomas Olakoyejo · Tunde Bello-Ochende · Josua Petrus Meyer ·
ASME 2013 International Mechanical Engineering Congress and Exposition; 11/2013

Conference Paper: Heat Transfer Enhancement in a Parabolic Trough Receiver Using Wall Detached Twisted Tape Inserts
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer
ASME 2013 International Mechanical Engineering Congress and Exposition; 11/2013

Article: Constructal design of combined microchannel and micro pin fins for electronic cooling
O. O. Adewumi · T. Bello-Ochende · J. P. Meyer
International Journal of Heat and Mass Transfer 11/2013; 66:315-323.

Article: Design and optimization of a downhole coaxial heat exchanger for an enhanced geothermal system (EGS)
P. J. Yekoladio · T. Bello-Ochende · J. P. Meyer
Renewable Energy 07/2013; 55:128-137.

Article: Numerical investigation of entropy generation in a parabolic trough receiver at different concentration ratios
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer ·

Energy 05/2013; 53:114–127.
Article: Numerical investigation of entropy generation in a parabolic trough receiver at different concentration ratios
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer ·
Energy 05/2013; 53:114–127.

Article: Three-dimensional optimisation of a fuel gas channel of a proton exchange membrane fuel cell for maximum current density
Surajudeen Olanrewaju Obayopo · Tunde Bello?Ochende · Josua Petrus Meyer
International Journal of Energy Research 03/2013; 37(3).

Article: Constructal multi scale cylinders with rotation cooled by natural convection
L.G. Page · T. Bello-Ochende · J.P. Meyer ·
International Journal of Heat and Mass Transfer 01/2013; 57(1):345–355.

Article: Constructal flow orientation in conjugate cooling channels with internal heat generation
T. Bello-Ochende · O.T. Olakoyejo · J.P. Meyer · A. Bejan · S. Lorente
International Journal of Heat and Mass Transfer 01/2013; 57(1):241–249.

Article: Optimum performance of the small-scale open and direct solar thermal Brayton cycle at various environmental conditions and constraints
W. G. Le Roux · T. Bello-Ochende · J. P. Meyer
Energy 10/2012; 46:42–50. ·

Article: Constructal optimisation of conjugate triangular cooling channels with internal heat generation
J.P. Meyer · O.T. Olakoyejo · T. Bello-Ochende ·
International Communications in Heat and Mass Transfer 10/2012; 39(8):1093–1100.

Article: Optimum performance of the small-scale open and direct solar thermal Brayton cycle at various environmental conditions and constraints
W.G. Le Roux · T. Bello-Ochende · J.P. Meyer·
Energy 10/2012; 46(1):42–50.

Article: Thermodynamic optimisation of the integrated design of a small?scale solar thermal Brayton cycle
W. G. le Roux · T. Bello?Ochende · J. P. Meyer

International Journal of Energy Research 09/2012; 36(11).

Article: Minimization of thermal resistance in an air cooled porous matrix made up of solid spheres with heat generation
J. Baloyi · T. Bello-Ochende · J.P. Meyer ·
International Communications in Heat and Mass Transfer 08/2012; 39(7):966–970.

Conference Paper: Numerical Study and Optimisation of Channel Geometry and Gas Diffusion Layer of a PEM Fuel Cell
Surajudeen O. Obayopo · Tunde Bello-Ochende · Josua P. Meyer
ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2012 6th International Conference on Energy Sustainability; 07/2012

Conference Paper: Optimising the Performance of a PEM Fuel Cell With Transverse Fins Insert in the Channel Flow Using Mathematical Algorithm
Surajudeen O. Obayopo · Tunde Bello-Ochende · Josua P. Meyer
ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2012 6th International Conference on Energy Sustainability; 07/2012
Conference Paper: Optimum Small-Scale Open and Direct Solar Thermal Brayton Cycle for Pretoria, South Africa
W. G. Le Roux · T. Bello-Ochende · J. P. Meyer
ASME 2012 6th International Conference on Energy Sustainability collocated with the ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology; 07/2012

Conference Paper: Numerical analysis of thermal performance of an externally longitudinally finned receiver for parabolic trough solar collector
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P Meyer
9th International conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malta; 07/2012

Article: Modelling and optimization of reactant gas transport in a PEM fuel cell with a transverse pin fin insert in channel flow
S.O. Obayopo · T. Bello-Ochende · J.P. Meyer ·
International Journal of Hydrogen Energy 07/2012; 37(13):10286–10298.
International Journal of Thermal Sciences 01/2016; 99:238-257.

Article: Three-dimensional analysis and numerical optimization of combined natural convection and radiation heat loss in solar cavity receiver with plate fins insert
Tunde Bello-Ochende · L.C. Ngo · J.P. Meyer
Energy Conversion and Management 09/2015; 101:757-766.

Article: Second law analysis and optimization of a parabolic trough receiver tube for direct steam generation
H. C. Nolte · T. Bello-Ochende · J. P. Meyer
Heat and Mass Transfer 06/2015; 51(6):875-887.

Article: Integrated solar thermal Brayton cycles with either one or two regenerative heat exchangers for maximum power output
E. Jansen · T. Bello-Ochende · J.P. Meyer ·
[Energy 05/2015; 86.

Article: Thermodynamic analysis and performance optimization of organic rankine cycles for the conversion of low-to-moderate grade geothermal heat
P. J. Yekoladio · T. Bello?Ochende · J. P. Meyer ·
International Journal of Energy Research 03/2015; 39(9).

Article: Multi-objective and thermodynamic optimisation of a parabolic trough receiver with perforated plate inserts
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer ·
Applied Thermal Engineering 02/2015; 77.

Article: Numerical modelling and optimisation of natural convection heat loss suppression in a solar cavity receiver with plate fins
L.C. Ngo · T. Bello-Ochende · J.P. Meyer
Renewable Energy 02/2015; 74:95–105.

Article: Heat transfer and thermodynamic performance of a parabolic trough receiver with centrally placed perforated plate inserts
Aggrey Mwesigye · Tunde Bello - Ochende · Josua P. Meyer ·
Applied Energy 12/2014; 136(989):1003.

Conference Paper: Thermal performance of a parabolic trough receiver with perforated conical inserts for heat transfer enhancement
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer ·
ASME 2014 International Mechanical Engineering Congress and Exposition, Montreal, Quebec, Canada; 11/2014

Conference Paper: Heat Transfer Enhancement in a Parabolic Trough Receiver Using Perforated Conical Inserts
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P Meyer
The 15th International Heat Transfer Conference, Kyoto Japan; 08/2014

Conference Paper: Comparison between the Thermal Performance of Single and Two-Layer Microchannels Inserted with Micro Pin Fins
Olayinka Omowunmi Adewumi · Tunde Bello-Ochende · Josua P. Meyer
IHTC 15, Kyoto Japan; 08/2014

Conference Paper: Geometric Optimisation of Multi-Layered Microchannel Heat Sink with Different Flow Arrangements
Olayinka Omowunmi Adewumi · Tunde Bello-Ochende · Josua P. Meyer
IHTC 15, Kyoto Japan; 08/2014

Article: Minimum entropy generation due to heat transfer and fluid friction in a parabolic trough receiver with non-uniform heat flux at different rim angles and concentration ratios
Aggrey Mwesigye · Tunde Bello-Ochende · Josua P. Meyer
Energy 08/2014; 73:606-617.

Article: The efficiency of an open-cavity tubular solar receiver for a small-scale solar thermal Brayton cycle
W.G. Le Roux · T. Bello-Ochende · J.P. Meyer ·

Conference Paper: Thermal and thermodynamic analysis of a parabolic trough receiver at different concentration ratios and rim angles
Aggrey Mwesigye · Willem Gabriel Le Roux · Tunde Bello-Ochende · Josua Petrus Meyer
10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Orlando, Floria; 07/2014

Article: Thermodynamic optimisation and computational analysis of irreversibilities in a small-scale wood-fired circulating fluidised bed adiabatic combustor
J. Baloyi · T. Bello-Ochende · J.P. Meyer
Energy 06/2014; 70.

Dataset: Adewumi, Bello-Ochende and Meyer 2013
Josua P. Meyer · O. O. Adewumi · T. Bello-Ochende

Article: Maximum thermal conductance for a micro-channel, utilising Newtonian and non-Newtonian fluid
M. D. Stocks · T. Bello-Ochende · J. P. Meyer
Heat and Mass Transfer 12/2013; 50(6).

Article: A review on the thermodynamic optimisation and modelling of the solar thermal Brayton cycle
W. G. Le Roux · T. Bello-Ochende · J. P. Meyer ·
Renewable and Sustainable Energy Reviews 12/2013; 28:677-690.

Adewumi, Olayinka Omowunmi

Comparison between the Thermal Performance of Single and Two-Layer Microchannels Inserted with Micro Pin Fins

Geometric Optimisation of Multi-Layered Microchannel Heat Sink with Different Flow Arrangements

Increased Heat Load Effects on the Thermal Performance of Single- and Two-Layered Microchannels with Varying Axial Length and Micro Pin-Fin Inserts

NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID

Ziskind, Gennady

IN MEMORIAM: RICHARD J. GOLDSTEIN

Fletcher, L.S. "Skip"

IN MEMORIAM: RICHARD J. GOLDSTEIN

Dembele, Siaka

IN MEMORIAM: RICHARD J. GOLDSTEIN

Laubscher, Ryno

FUNDAMENTAL ERRORS IN HISTORICAL STUDIES ON LAMINAR INTERNAL CONVECTION IN CIRCULAR TUBES WITH A UNIFORM HEAT FLUX: NEW PERSPECTIVES

Le Roux, Willem G.

HEAT LOSS ANALYSIS FOR AN OPEN-CAVITY TUBULAR SOLAR RECEIVER

EXPERIMENTAL TESTING OF A SMALL-SCALE SOLAR THERMAL BRAYTON CYCLE RECUPERATOR

Burger, Francois H.

Topology Optimisation for the Volume-to-Surface Problem in a Three-Dimensional Cubic Domain Using Conduction Cooling

Di Marco, Paolo

IN MEMORIAM: RICHARD J. GOLDSTEIN

Simon, Terrence W.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Slootweg, M.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Grobler, N.J.M.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Morris, R. M.

MATHEMATICAL OPTIMIZATION OF JETS IN CROSSFLOW

Padet, Jacques

IN MEMORIAM: RICHARD J. GOLDSTEIN

Da Veiga , W. Reinaldo

Abstract of "THE EFFECT OF A PERMANENT MAGNET ON SCALE FORMATION IN A TUBE"

SEMICIRCULAR HEAT EXCHANGERS

THE EFFECT OF A PERMANENT MAGNET ON SCALE FORMATION IN A TUBE

TEMPERATURE CONTROL IN REFRIGERATED TRANSPORT WITH A SNOW BAG

Maruyama, Shigenao

IN MEMORIAM: RICHARD J. GOLDSTEIN

Prinsloo, Francois P.A.

Heat Transfer and Pressure Drop Characteristics in the Annuli of Tube-in-Tube Heat Exchangers (Horizontal Lay-Out)

Khoodaruth, Abdel

NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES

Page , Logan

GEOMETRIC OPTIMIZATION FOR MAXIMUM HEAT TRANSFER DENSITY RATE FROM CYLINDERS ROTATING IN NATURAL CONVECTION

Vanderwagen, Calvin P.

The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime

Dirker, Jaco

Inlet Flow Effects in Microchannels on Single-Phase Heat Transfer Coefficients and Friction Factors

Experimental Studies of Condensation Heat Transfer in an Inclined Microfin Tube

Topology Optimisation for the Volume-to-Surface Problem in a Three-Dimensional Cubic Domain Using Conduction Cooling

Numerical Study of Heat Transfer Characteristics for Different Solar Flux Distributions on Linear Fresnel Collector Absorber Tubes in Laminar Flow

Heat Transfer and Pressure Drop Characteristics in the Annuli of Tube-in-Tube Heat Exchangers (Horizontal Lay-Out)

Experimental Investigation on Pressure Drop and Friction Factor in Tubes at Different Inclination Angles During the Condensation of R134a

Madanan, Umesh

IN MEMORIAM: RICHARD J. GOLDSTEIN

Isaev, Sergey

IN MEMORIAM: RICHARD J. GOLDSTEIN

Nowak, Andrzej J.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Aduralere, Timothy T.

NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID

Mohamad, Abdulmajeed

IN MEMORIAM: RICHARD J. GOLDSTEIN

Dellar, Kyle E.

EXPERIMENTAL TESTING OF A SMALL-SCALE SOLAR THERMAL BRAYTON CYCLE RECUPERATOR

Ntumba, Tshimanga

The Effective of Sonication Time on Effective Thermal Conductivity of Glycerol-MgO Based Nanofluids

Mahdavi, Mostafa

Comparative Study on Simulation of Convective Al2O3-Water and ZrO2-Water Nanofluid by Using ANSYS-FLUENT

THERMAL AND FLOW ANALYSIS OF A HOT AIR CURTAIN SYSTEMS FOR THE CASE OF DUST FLOW SUPPRESSION THROUGH A SEMI-ENCLOSED HOUSING

Smith, Christo

SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE

Abstract of "SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE"

Shafeyeva, Yelena

IN MEMORIAM: RICHARD J. GOLDSTEIN

Mahmood, Gazi I.

EFFECT OF SIDEPINS ON THE THERMOHYDRAULIC CHARACTERISTICS OF AN ARRAY OF INTERNAL PIN FINS

Modified Endwall Fluid Flow in a Dimpled Pin Fin Array for Heat Transfer Enhancement

THERMOHYDRAULIC PERFORMANCE OF A CHANNEL EMPLOYING WAVY POROUS SCREENS

Cervantes, Jaime

IN MEMORIAM: RICHARD J. GOLDSTEIN

Tao, Wen-Quan

IN MEMORIAM: RICHARD J. GOLDSTEIN

Minkowycz, Wally J.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Coelho, Pedro Jorge Martins

IN MEMORIAM: RICHARD J. GOLDSTEIN

Ngo, Lloyd C.

Numerical Modelling of Combined Natural Convection and Surface Radiation Heat Transfer in Cavity Receiver with Plate Fins

Wright , D.

CFD MODELLING OF JET IMPINGEMENT BOILING USING SWIRL

Moll, W.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Kuehn, Thomas

IN MEMORIAM: RICHARD J. GOLDSTEIN

de Swardt, C. A.

A PERFORMANCE COMPARISON BETWEEN AN AIR-SOURCE AND A GROUND-SOURCE REVERSIBLE HEAT PUMP

Abstract of "A PERFORMANCE COMPARISON BETWEEN AN AIR-SOURCE AND A GROUND-SOURCE REVERSIBLE HEAT PUMP"

Kulacki, Francis A.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Srinivasan, Vinod

IN MEMORIAM: RICHARD J. GOLDSTEIN

Bashir, Abubakar Idris

EXPERIMENTAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER IN THE TRANSITIONAL FLOW REGIME OF AN INCLINED SMOOTH TUBE

THERMOHYDRAULICS OF LAMINAR FLOW THROUGH INCLINED CIRCULAR TUBE WITH SPRING TAPE INSERTS

Elahee, M. K.

NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES

Giwa, Solomon O.

HEAT TRANSFER ENHANCEMENT OF DILUTE AL₂O₃-MWCNT WATER BASED HYBRID NANOFLUIDS IN A SQUARE CAVITY

Tari, Ilker

IN MEMORIAM: RICHARD J. GOLDSTEIN

Modest, Michael F.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Jaluria, Yogesh

IN MEMORIAM: RICHARD J. GOLDSTEIN

Arinç, Faruk

IN MEMORIAM: RICHARD J. GOLDSTEIN

Bayazitoglu, Yildiz

IN MEMORIAM: RICHARD J. GOLDSTEIN

Roux, Stephan Michael

EFFECT OF SIDEPINS ON THE THERMOHYDRAULIC CHARACTERISTICS OF AN ARRAY OF INTERNAL PIN FINS

Modified Endwall Fluid Flow in a Dimpled Pin Fin Array for Heat Transfer Enhancement

Zhang, Xing

IN MEMORIAM: RICHARD J. GOLDSTEIN

Malan, Arnaud

OPTIMAL GEOMETRY FOR CONJUGATE HEAT TRANSFER IN A COOLING CHANNEL

A FAST MATRIX-FREE IMPLICIT UNSTRUCTURED-HYBRID ALGORITHM FOR MODELLING NON-LINEAR HEAT CONDUCTION

Constructal Conjugate Heat Transfer in Three-Dimensional Cooling Channels

Thermal Characterization of Rectangular Cooling Shapes in Heat Generating Mediums - A Three-Dimensional Investigation

A Matrix-free Implicit Algorithm for Modeling Non-Linear Heat Transfer on Hybrid Unstructured Grids

Pretorius, Leon

MIXED CONVECTION HEAT TRANSFER IN AN ANNULAR ENCLOSURE

SIMULATION OF HEAT EXCHANGE IN LARGE AIR COOLED CONDENSERS

Obayopo, Surajudeen O.

NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID

Abadi, Seyyed Mohammad Ali Noori Rahim

CONDENSATION HEAT TRANSFER COEFFICIENT AND PRESSURE DROP OF R134a IN A TUBE: MODELING AND OPTIMIZATION

CFD SIMULATION OF CONDENSATION INSIDE SMOOTH INCLINED TUBE AT DIFFERENT SATURATION TEMEPRATURES

Everts, Marilize

EVALUATION OF THE IRREVERSIBILITY DISTRIBUTION RATIO AND PUMPING POWER USING HEAT TRANSFER AND PRESSURE DROP POWER CURVES OF A SMOOTH CIRCULAR TUBE WITH LAMINAR, TRANSITIONAL AND TURBULENT FLOWS

FORCED CONVECTION THERMAL ENTRANCE LENGTH FOR SIMULTANEOUSLY HYDRODYNAMICALLY AND THERMALLY DEVELOPING LAMINAR FLOW AT A CONSTANT HEAT FLUX

HEAT TRANSFER OF DEVELOPING FLOW IN THE TRANSITIONAL FLOW REGIME

The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime

STUDY ON THE HEAT TRANSFER AND PRESSURE DROP POWER CURVES FOR ENTROPY GENERATION RATE IN THE LAMINAR, TRANSITIONAL, AND TURBULENT FLOW REGIMES

RELATIONSHIP BETWEEN PRESSURE DROP AND HEAT TRANSFER IN SMOOTH HORIZONTAL TUBES

TRANSITIONAL FLOW REGIME NOMENCLATURE FOR SMOOTH HORIZONTAL TUBES HEATED AT A CONSTANT HEAT FLUX

EFFECT OF INLET TUBE SPACING ON FRICTION FACTORS IN MULTIPLE CIRCULAR TUBES IN THE TRANSITIONAL FLOW REGIME

Ewim, Daniel R. E.

EVALUATION OF THE IRREVERSIBILITY DISTRIBUTION RATIO AND PUMPING POWER USING HEAT TRANSFER AND PRESSURE DROP POWER CURVES OF A SMOOTH CIRCULAR TUBE WITH LAMINAR, TRANSITIONAL AND TURBULENT FLOWS

NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE

STUDY ON THE HEAT TRANSFER AND PRESSURE DROP POWER CURVES FOR ENTROPY GENERATION RATE IN THE LAMINAR, TRANSITIONAL, AND TURBULENT FLOW REGIMES

Experimental Investigation on Pressure Drop and Friction Factor in Tubes at Different Inclination Angles During the Condensation of R134a

EXPERIMENTAL INVESTIGATION OF CONDENSATION HEAT TRANSFER COEFFICIENTS IN AN INCLINED SMOOTH TUBE AT LOW MASS FLUXES

Hoffmann , Jaap E.

FUNDAMENTAL ERRORS IN HISTORICAL STUDIES ON LAMINAR INTERNAL CONVECTION IN CIRCULAR TUBES WITH A UNIFORM HEAT FLUX: NEW PERSPECTIVES

Worek, William

IN MEMORIAM: RICHARD J. GOLDSTEIN

Bejan, Adrian

OPTIMAL GEOMETRY FOR CONJUGATE HEAT TRANSFER IN A COOLING CHANNEL

Constructal Conjugate Heat Transfer in Three-Dimensional Cooling Channels

Bischof, John

IN MEMORIAM: RICHARD J. GOLDSTEIN

Gross, Ulrich

IN MEMORIAM: RICHARD J. GOLDSTEIN

Wang, Qiuwang

IN MEMORIAM: RICHARD J. GOLDSTEIN

Liebenberg, Leon

THE SEARCH FOR OBJECTIVE HEAT TRANSFER AND PRESSURE DROP MODELS FOR FLOW CONDENSATION IN HORIZONTAL TUBES

OPTIMAL GEOMETRY FOR CONJUGATE HEAT TRANSFER IN A COOLING CHANNEL

The Characterization of Flow Regimes with Power Spectral Density Distributions of Pressure Fluctuations During Condensation in Smooth and Enhanced Tubes

PRESSURE DROP DURING CONDENSATION IN SMOOTH TUBES WITH A HELICAL WIRE INSERT

Constructal Conjugate Heat Transfer in Three-Dimensional Cooling Channels

FLOW PATTERNS DURING CONDENSATION IN SMOOTH AND MICRO-FIN TUBES

Steinfeld, Aldo

IN MEMORIAM: RICHARD J. GOLDSTEIN

Yoshida, Hideo

IN MEMORIAM: RICHARD J. GOLDSTEIN

Orlande, Helcio Rangel Barreto

IN MEMORIAM: RICHARD J. GOLDSTEIN

Mwesigye, Aggrey

HEAT TRANSFER ENHANCEMENT, THERMODYNAMIC AND NUMERICAL OPTIMISATION OF COMPLEX SOLAR ENERGY SYSTEMS-PARABOLIC TROUGH COLLECTOR SYSTEMS

Heat Transfer Enhancement in a Parabolic Trough Receiver Using Perforated Conical Inserts

Thome, John

IN MEMORIAM: RICHARD J. GOLDSTEIN

Vishwakarma, Devendra K

THERMOHYDRAULICS OF LAMINAR FLOW THROUGH INCLINED CIRCULAR TUBE WITH SPRING TAPE INSERTS

Robbins, S.L.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Lipinski, Wojciech

IN MEMORIAM: RICHARD J. GOLDSTEIN

Mulock Houwer, Franscois A.

The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime

Valluri, Prashant

CFD MODELLING OF JET IMPINGEMENT BOILING USING SWIRL

Oosthuizen, E.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Girshick, Steven

IN MEMORIAM: RICHARD J. GOLDSTEIN

Szmyd, Janusz

IN MEMORIAM: RICHARD J. GOLDSTEIN

Aksan, Alptekin

IN MEMORIAM: RICHARD J. GOLDSTEIN

Sobamowo, Gbeminiyi

NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE

Coetzee, Paul P.

SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE

Abstract of "SCALE PREVENTION IN A HOT-WATER STORAGE TANK WITH A MAGNETIC PHYSICAL WATER TREATMENT DEVICE"

Vasiliev, Leonard L.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Osman, Sohaib

EXPERIMENTAL EXAMINATION OF TRANSITIONAL FLOW OF DILUTE ALUMINA − WATER NANOFLUID

Dirker, Jaco

THERMAL CHARACTERISATION OF EMBEDDED COOLING LAYERS WITH NEGLIGIBLE THERMAL INTERFACIAL RESISTANCE FOR ORTHOGONAL BI-DIRECTIONAL EXTERNAL HEAT EXTRACTION

Heat Transfer Coefficients in Concentric Annuli

NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES

Thermal Characterization of Rectangular Cooling Shapes in Heat Generating Mediums - A Three-Dimensional Investigation

Timchenko, Victoria

IN MEMORIAM: RICHARD J. GOLDSTEIN

Patankar, Suhas

IN MEMORIAM: RICHARD J. GOLDSTEIN

Ji, Tianfu Ji

PRESSURE DROP DURING CONDENSATION IN SMOOTH TUBES WITH A HELICAL WIRE INSERT

Menguc, M. Pinar

IN MEMORIAM: RICHARD J. GOLDSTEIN

Dauhoo, Muhammad Zaid

NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES

Kotze , O.J.

THERMAL AND FLOW ANALYSIS OF A HOT AIR CURTAIN SYSTEMS FOR THE CASE OF DUST FLOW SUPPRESSION THROUGH A SEMI-ENCLOSED HOUSING

Onwuegbusi, Adrian U

NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE

Cumo, Maurizio

IN MEMORIAM: RICHARD J. GOLDSTEIN

van Staden , M.P.

MIXED CONVECTION HEAT TRANSFER IN AN ANNULAR ENCLOSURE

SIMULATION OF HEAT EXCHANGE IN LARGE AIR COOLED CONDENSERS

Cramer, L.

THERMOHYDRAULIC PERFORMANCE OF A CHANNEL EMPLOYING WAVY POROUS SCREENS

Gbegudu, Joshua K

NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE

Honiball, R.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

Howell, John R.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Smirnov, Evgueni M.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Craig, Ken J.

CFD SIMULATION OF SOLAR RECEIVER JET IMPINGEMENT HEAT TRANSFER: RANS VS LES

CFD MODELLING OF JET IMPINGEMENT BOILING USING SWIRL

Davidson, Jane H.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Soni, Monaj K

THERMOHYDRAULICS OF LAMINAR FLOW THROUGH INCLINED CIRCULAR TUBE WITH SPRING TAPE INSERTS

Tamma, Kumar K.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Manglik, Raj M.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Kotze, Nicola M.

The Influence of Surface Roughness on Heat Transfer in the Transitional Flow Regime

Fisher, Tim

IN MEMORIAM: RICHARD J. GOLDSTEIN

Swanepoel, Wayne

EVALUATING WET COMPRESSION IN REFRIGERATION CYCLES WORKING WITH PURE OR NON-AZEOTROPIC REFRIGERANT MIXTURES FOR AIR-CONDITIONERS

Steyn, Madder

Heat Transfer Coefficients for Tubes in the Turbulent Single Phase Flow Regime with a Focus on Uncertainty

Egorov, Ivan Vladimirovich

IN MEMORIAM: RICHARD J. GOLDSTEIN

Pui, David Y.H.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Adelaja, Adecunle O.

EVALUATION OF THE IRREVERSIBILITY DISTRIBUTION RATIO AND PUMPING POWER USING HEAT TRANSFER AND PRESSURE DROP POWER CURVES OF A SMOOTH CIRCULAR TUBE WITH LAMINAR, TRANSITIONAL AND TURBULENT FLOWS

Experimental Studies of Condensation Heat Transfer in an Inclined Microfin Tube

NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE

STUDY ON THE HEAT TRANSFER AND PRESSURE DROP POWER CURVES FOR ENTROPY GENERATION RATE IN THE LAMINAR, TRANSITIONAL, AND TURBULENT FLOW REGIMES

Experimental Investigation on Pressure Drop and Friction Factor in Tubes at Different Inclination Angles During the Condensation of R134a

NUMERICAL OPTIMISATION OF FORCED CONVECTION OF WALL THICKNESS OF HEATED PLATES COOLED USING ALUMINA-WATER NANOFLUID

Khalatov, Artem

IN MEMORIAM: RICHARD J. GOLDSTEIN

Dombrovsky, Leonid A.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Zhao, Tianshou

IN MEMORIAM: RICHARD J. GOLDSTEIN

Markides, Christos N.

NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES

Quick , J.

CFD MODELLING OF JET IMPINGEMENT BOILING USING SWIRL

Cotta, Renato Machado

IN MEMORIAM: RICHARD J. GOLDSTEIN

Petit , Pascale J.

A STEADY-STATE MODEL FOR THE HIGH-PRESSURE SIDE OF UNITARY AIR-CONDITIONERS

Hanjalic, Kemal

IN MEMORIAM: RICHARD J. GOLDSTEIN

Stephan, Peter

IN MEMORIAM: RICHARD J. GOLDSTEIN

Juggurnath, D.

NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES

Wolff, Tamryn M.

HEAT LOSS ANALYSIS FOR AN OPEN-CAVITY TUBULAR SOLAR RECEIVER

Cheng, Ping

IN MEMORIAM: RICHARD J. GOLDSTEIN

Okafor, Izuchukwu Francis

Numerical Study of Heat Transfer Characteristics for Different Solar Flux Distributions on Linear Fresnel Collector Absorber Tubes in Laminar Flow

Fetuga, Ibrahim A

NUMERICAL INVESTIGATION OF TERNARY NANOFLUID FLOW WITH COMBINED STENT, TORUS-RING AND GROOVED TWISTED TAPE INSERTS UNDER A NON-UNIFORM TEMPERATURE WALL PROFILE

Hernandez-Guerrero, Abel

IN MEMORIAM: RICHARD J. GOLDSTEIN

Webb, Brent W.

IN MEMORIAM: RICHARD J. GOLDSTEIN

Bhattacharyya, Suvanjan

THERMOHYDRAULICS OF LAMINAR FLOW THROUGH INCLINED CIRCULAR TUBE WITH SPRING TAPE INSERTS

Garach, Darshik V.

Inlet Flow Effects in Microchannels on Single-Phase Heat Transfer Coefficients and Friction Factors

Bello-Ochende, Tunde